5G Field Testing with FieldFox

Learn about essential field tests for 5G installation, verification, optimization, and troubleshooting using the FieldFox handheld analyzer.

Vector Network Analyzer Basics

This course focuses on vector network analyzer basics, RF network theories, what a network analyzer measures, and what problems they solve.

Signal Analyzer Basics

This course focuses on a spectrum analyzer. Discover how frequency-domain measurement can be used to identify channel interference and RF noise measurement.

How to Design an RF Power Amplifier

Explore the basics of simulating an RF Power Amplifier design, and design approaches to the six different classes.

Introduction to Oscilloscopes

This fast-moving course will make you an oscilloscope expert in just 20 minutes.

Hands-on Guide to EV and EVSE Charging Conformance Testing

Learn from our hands-on demonstrations how you can adapt to evolving EV charging standards with real-world emulation and test automation.

RF Power Amplifier Design Deep Dive

Learn best practices for power amplifier design and the secrets to stability analysis, designing for modulation, and active impedance effects of phased array load pull.

Introduction to Cellular V2X: Vehicle to Everything Communications

Dive into the history of cellular vehicle-to-everything (C-V2X), the latest advancements, and deployment challenges.

Oscilloscope Probes 101

Oscilloscope probes connect your scope to your device under test. We will explore how to use, connect, and choose the right oscilloscope probe for your measurements.

EV / EVSE Charging Test

Testing of EV & EV supply equipment charging interfaces is vital to ensure both the vehicle & charging equipment can operate safely and seamlessly according to industry standards.

Oscilloscope Triggering Fundamentals

Dive deep into oscilloscope triggers. Knowing which trigger to use in your application will save you hours in the lab.

Automotive Ethernet Basics

Learn about the journey from standard to automotive Ethernet, speed, and compliance test requirements.

Designing for Signal Integrity

Learn the 3-step Approach to Solve Signal Integrity problems

How to Model Digital Beamforming

Learn why a Digital Beamformer IC is crucial for complete system performance.

Fundamental Problem Solving Using a Modern Oscilloscope

Learn how to make the most of the advanced measurement capabilities available in today's modern oscilloscopes.

How to Design 5G and 6G mmWave Beamforming Systems

Learn how to effectively control, optimize, and analyze beams with a real-world example for mmWave beamforming modeling and simulation.

Introduction to Signal Generators

How to use a signal generator and understand the different parameters that are important to the performance.

Bench Power Supply Basics

Learn about the fundamentals of bench power supplies.

DC and AC Power Fundamentals

Learn the basics of DC and AC electrical power, a must-know for virtually all electrical engineering applications.

Phased Array Antenna Innovations for Satellite Communications

In this course we will explore the advantages, development, and applications of Phased Array Antennas for satellite low Earth orbit (LEO) communications.