Firmware Installation Procedure:

1. Click on the "4352B Signal Analyzer Firmware Revision X.XX" listed below the page. Copy the file(.src) to a floppy disk. For Firmware version 2.11, rename the file name from "4352update.src" to "Update.src".

2. While pressing [Preset] key of the instrument, turn the instrument power on.

3. Insert the floppy disk into the disk drive.

4. Press 'PREVIEW DISK' softkey. The update disk revision will be displayed.

5. Confirm the displayed "Update Disk Revision" and press Return.

6. Press 'SYSTEM UPDATE' softkey, then 'CONTINUE' to install the firmware from the floppy disk to the instrument. It will take about a few minutes.

7. After "Update Complete" is displayed, press 'REBOOT' softkey to reboot the instrument.

8. Press [System] key, then 'FIRMWARE REVISION' softkey to confirm the current firmware revision. If "POWER ON TEST FAILED" isn't displayed on the LCD and the new firmware revison is correctly displayed, the firmware installation is successfully completed.

是德建议使用最新的版本，其中包括最新的漏洞修复和安全补丁
发布日期 版本 版本说明
2001-05-01 2.11 4352B Signal Analyzer Firmware Update Rev2.11
发布日期 版本
2001-05-01 2.11
Version Description
4352B Signal Analyzer Firmware Update Rev2.11

如何下载

  • Click the download button and save the file to a temporary directory on your PC (or instrument).

如何安装

  • See Above

颁发许可证

  • Does Not Require a License
Download

Installs on: Instrument

前提要求

  • No specific prerequisites

支持的仪器

  • 4352B

如何下载

  • Click the download button and save the file to a temporary directory on your PC (or instrument).

如何安装

  • See Above

颁发许可证

  • Does Not Require a License
Download

Installs on: Instrument

前提要求

  • No specific prerequisites

支持的仪器

  • 4352B
SHOW MORE