微波、射频、同轴、固态开关解决方案

M9101A is a high-density, 64-channel, 2-wire multiplexer with 500 usec switches for high speed signal routing of many different channels to a single point.

A high-density, 128-channel multiplexer with 500 usec switches for high speed signal routing of many different channels to a single point.

A high-density, 99-channel, 2-wire multiplexer with 4.5 msec switches for routing many higher power channels to a single point.

M9120A PXI Matrix Switch: 4x32, 100Vrms/2A, connects multiple points in a single instance with this 128 2-wire full cross-points switch matrix with 3ms switches.

Connect multiple points in a single instance with this high density 256 2-wire full cross-points switch matrix with 1msec switches.

Connect multiple points in a single instance with this high density 256 1-wire full cross-points switch matrix with 3 ms switches.

Route multiple signals up to 300 MHz in a single instance, allowing any combination of channel closures.

M9130A provides 26 independent, single-pole, double-throw (Form C) switches in a single PXI module. The armature relays handle up to 60W power.

M9131A is a high-density, 64-channel, single pole, double throw (SPDT) general purpose switch with durable high-speed, long life reed relays.

M9132A is a high-density, general purpose switch with 50 independent, single-pole, single-throw (Form A) switches in a single PXI module.

M9133A PXI Switch is a high-density 100-channel SPST general purpose switch with high-speed 350 ms switch closures, long-life reed relays.

A 20-channel SPST high-power switch with 5 A, 300 W / armature switches.

M9146A RF Multiplexer contains two 1x4 RF switch multiplexers in a single PXI module. It offers 50 ohm inputs with bi-directional switching up to 3 GHz.

M9147A RF Multiplexer (3 GHz, Quad 1 x 4, 50 Ω) routes signals up to 3 GHz through any of four 1x4 RF switch multiplexers in a single PXI module.

Route signals up to 3 GHz through a 1 x 8 RF switch multiplexer in a single PXI module.

M9149A routes signals up to 3 GHz through a 1x16 RF switch multiplexer in a single PXI module. It offers 50 Ω inputs with bi-directional switching.

The M9155C PXI Hybrid Dual SPDT switch module provides a 0.03 dB insertion loss repeatability, high isolation, low SWR with operating life up to 10 million cycles.

M9155CH40 PXI hybrid dual SPDT switch module provides an exceptional 0.03 dB insertion loss repeatability, high isolation, low SWR with a long operating life.

M9156C PXI Hybrid Dual Transfer switch module provides an exceptional 0.03 dB insertion loss repeatability, high isolation, low SWR with a long operating life.

M9156CH40 PXI hybrid dual transfer switch module provides an exceptional 0.03 dB insertion loss repeatability with a long operating life up to 10 million cycles.

M9157C PXI Hybrid Single SP6T switch module provides exceptional 0.03 dB insertion loss repeatability guaranteed throughout the 2 million cycle operating life.

The M9157CH40 PXI hybrid single SP6T switch module provides 0.03 dB insertion loss repeatability guaranteed throughout the 5 million cycle operating life.

M9161D PXI Dual SP4T solid state switch module provides an ultra-long cycle life, fast switching speed and high isolation, all within a single slot enclosure.

M9164A 2X16 PXIe switch matrix, 300 KHz to 6.5 GHz is a full cross-bar switch matrix that provides a switch based multiport VNA solution.

M9164B 2X16 PXIe switch matrix, 300 KHz to 9 GHz is a full cross-bar switch matrix that provides a switch based multiport VNA solution.

M9164C 2X16 PXIe switch matrix, 300 KHz to 18 GHz is a full cross-bar switch matrix that provides a switch based multiport VNA solution.

M9165A 2X8 PXIe switch matrix, 300 KHz to 6.5 GHz is a full cross-bar switch matrix that provides a switch based multiport VNA solution.

M9165B 2X8 PXIe switch matrix, 300 KHz to 9 GHz is a full cross-bar switch matrix that provide a switch based multiport VNA solution

M9165C 2X8 PXIe switch matrix, 300 KHz to 18 GHz is a full cross-bar switch matrix that provides a switch based multiport VNA solution

改善插入损耗可重复性和隔离度，这是实现高性能测试系统的必要条件

改善插入损耗可重复性和隔离度，这是实现高性能测试系统的必要条件。

改善插入损耗可重复性和隔离度，这是实现高性能测试系统的必要条件。

通过该端接开关提高信号精度，获得绝佳的隔离度，40 GHz时最低达到65 dB。

改善插入损耗可重复性和隔离度，这是实现高性能测试系统的必要条件

改善插入损耗可重复性和隔离度，这是实现高性能测试系统的必要条件。

改善插入损耗可重复性和隔离度，这是实现高性能测试系统的必要条件。

通过该端接开关提高信号精度，获得绝佳的隔离度，40 GHz时最低达到65 dB。

为自动测试测量、信号监测和路由应用提供所需的可靠性。

为自动测试测量、信号监测和路由应用提供必要可靠性

为自动测试测量、信号监测和路由应用提供所需的可靠性

为自动测试测量、信号监测和路由应用提供所需的可靠性

为自动测试测量、信号监测和路由应用提供必要可靠性

为自动测试测量、信号监测和路由应用提供所需的可靠性。

外形紧凑、结实可靠，拥有优异的可重复性、超长的使用寿命和出色的隔离度

外形紧凑、结实可靠，拥有优异的可重复性、超长的使用寿命和出色的隔离度。

集低驻波比、长使用寿命和更高频率于一身，适用于通信和航空航天应用

外形紧凑、结实可靠，拥有优异的可重复性、超长的使用寿命和出色的隔离度

集低驻波比、长使用寿命和更高频率于一身，适用于通信和航空航天应用

外形紧凑、结实可靠，拥有优异的可重复性、超长的使用寿命和出色的隔离度

集低驻波比、长使用寿命和更高频率于一身，适用于通信和航空航天应用。

这款负载端接开关可提供最小 90 dB 典型值的卓越隔离度，显著改善信号准确度。

这款负载端接开关可提供 90 dB @ 12 GHz 典型值的卓越隔离度，显著改善信号准确度。

通过该端接开关提高信号精度，获得绝佳的隔离度，12 GHz 时通常达到 90 dB。

通过该端接开关提高信号精度，获得绝佳的隔离度，12 GHz 时通常达到 90 dB。

这款负载端接开关可提供 90 dB @ 12 GHz 典型值的卓越隔离度，显著改善信号准确度。

通过该端接开关提高信号精度，获得绝佳的隔离度，12 GHz 时通常达到 90 dB。

这款非负载端接开关可提供最小 90 dB 的卓越隔离度，显著改善信号准确度。

这款非负载端接开关可提供 90 dB @ 12 GHz 典型值的卓越隔离度，显著改善信号准确度。

这款非负载端接开关可提供出色的隔离度（在 12 GHz 时为 90 dB 典型值），显著改善信号准确度。

这款非负载端接开关可提供最小 90 dB 典型值的卓越隔离度，显著改善信号准确度。

这款非负载端接开关可提供出色的隔离度（在 12 GHz 时为 90 dB 典型值），显著改善信号准确度

这款非负载端接开关可提供 90 dB @ 12 GHz 典型值的卓越隔离度，显著改善信号准确度。

U7104E 多端口机电开关（直流至 50 GHz）拥有出色的射频性能，并且端口数更多，适用于多端口器件或多个被测器件的测试。

Keysight 67 GHz, SP4T multiport electromechanical switches provide superior RF performance with higher port count for multi-port or multi-DUT testing signal routing applications.

Keysight U7104N 直流至 54 GHz SP4T 多端口开关具有出色的射频性能，满足更高性能测试系统的要求。

U7106E 50 GHz SP6T 多端口机电开关具有出色的射频性能，满足更高性能测试系统的要求。

U7106F 多端口机电同轴开关拥有出色的射频性能，并且端口数更多，适用于多个被测器件的测试信号路由应用。

U7106N 54 GHz SP6T 多端口机电开关具有出色的射频性能和更多的端口，适用于多端口测试。

U7108A 9 GHz SP8T 多端口开关可靠性高，适用于自动化测试与测量、信号监测和路由应用。

Keysight 20 GHz SP8T 多端口机电开关拥有出色的射频性能，并且端口数更多，适用于多端口器件或多个被测器件的测试信号路由应用。

Keysight 26.5 GHz SP8T 多端口机电开关拥有出色的射频性能，并且端口数更多，适用于多端口器件或多个被测器件的测试信号路由应用。

U7110A 直流至 9 GHz SP10T 多端口机电开关提供了出色的射频性能。

Keysight U7110B 多端口机电开关（直流至 20 GHz）拥有出色的射频性能，并且端口数更多，适用于多端口器件或多个被测器件的测试。

Keysight 26.5 GHz SP10T 多端口机电开关拥有出色的射频性能，并且端口数更多，适用于多端口器件或多个被测器件的测试信号路由应用。